Faculty
 
  Position: Home >> Faculty >> Faculty >> Mechanic Manufacturing and Automation Department >> Professor >> Content

Yonghong FU

Ph.D., Professor, Supervisor of Ph.D.

ADDRESS

Institute of Surface & Interface Technology, School of Mechanical Engineering, Jiangsu University, No. 301 Xuefu Road, Zhenjiang, Jiangsu, 212013, China

PHONE: 0511-88780056

FAX: 0511-88780056

E-mailfyh@ujs.edu

Website:

Research Interest

☆ Laser surface texturing (LST)

☆ Tribology & Lubrication

☆ Advanced technology of mechanical seal

☆ Optimization design and manufacture of the surface texturing for dies

☆ Application of laser technology & the development of laser processing equipment

☆ Advanced technology of bearing

Educational Background

☆ Senior Visiting Scholar, University of Virginia, U. S. A. 2009.8-2010.1

☆ Ph. D. Jiangsu University, China, 2008

☆ M.S. Jiangsu University of Science and Technology, China, 1993

☆ B.S. Jiangsu Institute of Technology, China, 1987

Teaching Courses

Tolerance and technology with the measurement

Testing Technology

Research Achievement

Publications List

  1. 1. Yonghong Fu, Yunxia Ye, Yongkang Zhang, Lan Cai. The Technology of Laser Honing Applied in Distinctively Improving the Lubrication of Frictional Units,” Key Engineering Materials, 2001, 202-203: 265-270. (SCI Indexed, EI Indexed)
  2. 2. Yonghong Fu, Yunxia Ye, Haiyan Tian, Yongkang Zhang, Lan Cai. Micromachining the surface of metallic workpiece by pulse YAG laser. Key Engineering Materials, 2003, 259-260: 522-525. (EI Indexed)
  3. 3. Yonghong Fu, Yunxia Ye, Yongkang Zhang, Lan Cai. Technology of laser honing applied in distinctively improving the lubrication of frictional units. Chinese Journal of Mechanical Engineering, 2002, 38(8): 115-117. (EI Indexed)
  4. 4. Yonghong Fu, Huawei Zhang, Jinghu Ji, Xijun Hua. Numerical analysis on the lubrication performance of piston ring by surface micro-texturing. Transactions of CSICE, 2009, 27(2): 180-185. (EI Indexed)
  5. 5. Yonghong Fu, Wei Ji, Huawei Zhang, Jinghu Ji, Xijun Hua. Influence of surface regular micro-pore radius on lubrication performance of piston ring. Journal of Jiangsu University (Natural Science Edition), 2010, 31(6): 621-624. (EI Indexed)
  6. 6. Yonghong Fu, Jinghu Ji, Xijun Hua, Chaojun Yang, Qinsheng Bi. Numerical analysis of integrated performance of mechanical seals with regular micro-surface structure. Journal of Drainage and Irrigation Machinery Engineering, 2010, 28(2): 169-173. (EI Indexed)
  7. 7. Yonghong Fu, Chengdong Li, Xijun Hua, Tao Mi, Jian Ni. Study on friction and wear properties of the laser textured mold surface with micro-convex. Tribology, 2009, 29(4): 1-6. (EI Indexed)
  8. 8. Yonghong Fu, Jinghu Ji, Xijun Hua, Qinsheng Bi. Numerical analysis the tribological performance of a laser surface textured mechanical seal. Key Engineering Materials, 2011, 464: 518-523. (EI Indexed)
  9. 9. Yonghong Fu, Wei Yang, Huawei Zhang, Xijun Hua. Friction and wear of cam with laser micro-texture under lubrication. Transactions of the Chinese Society of Agricultural Machinery, 2010, 41(1): 216-220. (EI Indexed)
  10. 10. Yonghong Fu, Huacai Lu, Xijun Hua, Bifeng Yin, Genning Tao. Theoretical analysis on lubrication and wear-resisting of the honed cylinder liner. Transactions of CSICE, 2006, 24(6): 559-564. (EI Indexed)
  11. 11. Yonghong Fu, Dacheng Wang, Run Yuan, Lan Cai, Yongkang Zhang. Research on controlling method for different classifications of laser surface strengthening process by using artificial neural network. Transactions of the CSAE, 2004, 20(5): 82-85. (EI Indexed)
  12. 12. Lan Cai, Yonghong Fu, Yunxia Ye, Yongkang Zhang, Haiyan Tian. The Application of laser honing in the treatment of cylinder surface. Journal of Jiangsu University (Natural Science Edition), 2002, 23(1): 5-8. (EI Indexed)
  13. 13. Yeyun Xia, Yonghong Fu, Guocheng Yang, Zhaohui Chen, Yongkang Zhang. Study on laser phase transformation hardening of HT250 by high speed axis flow CO2 laser. Chinese Journal of Lasers, 2002, A29(10): 945-949. (EI Indexed)
  14. 14. Jinghu Ji, Yonghong Fu, Long Wei, Xijun Hua, Qinsheng Bi. Experimental of lubrication properties of laser surface texturing mechanical seal. Journal of Drainage and Irrigation Machinery Engineering, 2011, 29(5). (EI Indexed)
  15. 15. Yonghong Fu, Jinghu Ji, Qinsheng Bi. Hydrodynamic Lubrication of Surface Contact with

Elliptical Dimples. In: 6th China International Symposium on Tribology. Lanzhou, 19-22 Aug. 2011.

Patents

[1] Yongkang Zhang, Yonghong Fu et al. A laser processing method of the

tribo-pairs surfaces. ZL02138076.7

[2] Yonghong Fu et al. A new method of zero-leakage and non-contact mechanical

seal ZL 200510038704.9

Represent Projects

Investigation on the active design-manufacture and the mechanism of tribology – forming of the metal plastic forming of dies surface with surface micro-texturing. Project supported by Nation Natural Science Foundation of China (Grant No. 51175233)

The design and manufacturing mechanism of surface with regular micro-texturing.

Project supported by Nation Natural Science Foundation of China (Grant No. 50475122)

Research and industrializing of high reliability of the economy tractor. Project

supported by Scientific Achievement Transforming Foundation of Jiangsu Province

(BA2010068)

The composite laser processing technologies and equipment of high performance of

cam shaft. Project supported by Key Technology R & D Program Foundation of Jiangsu Province

(BE2010060)

  1. The applied research on the key tribological units of vehicle engine with laser

Surface micro-texturing technology. Project supported by the Technical Innovation

Foundation of China South Industries Group Corporation (Grant No. Q10090561)

  1. The study of a new type of zero-leakage and non-contact mechanical seal and the

Laser surface texturing with crossing dimension processing.

Project supported by the Major Project of Jiangsu Province for High Technology

(Grant No. BG2007023).

  1. Investigation on the mechanism of laser surface micro-texturing modification on the

Tribolgical theory. Project supported by the Natural Science Foundation of the Jiangsu

Higher Education Institutions of China (Grant No. 03KJA460020).

  1. Development on the laser honing technology and equipment of high-performance

and environment-friendly engine. Project supported by the 10th Five Years Key

Programs for Science and Technology Development of Jiangsu Province

(Grant No. BE2001013)

Honors and Awards

Cultivate Candidate of the Jiangsu Province “333” Project, 2009

Member of "Top Talents in the Six Fields" of Jiangsu Province, 2008

1st place (Second level) Science and Technology Progress Award of National

Machinery Industry (2008)

  1. 2nd place (Second level) Science and Technology Progress Award of Jiangsu

province (2008)

  1. 4th place (First level) Teaching Achievement Award of Jiangsu Province (2007)
  2. 2nd place (First level) Teaching Achievement Award of Jiangsu Province (2005)

Society Memberships

Member of Chinese Mechanical Engineering

School of Mechanical Engineering Jiangsu University, Copy Rights ?2014-2018 All Rights
Address: 301 Xuefu Road, Zhenjiang City, Jiangsu Province, P.R. China 212013
XML 地图 | Sitemap 地图